Ranger Communications RCI-6900F-25 CB Radio "change radio mic" Questions

Ad

Question about Radio Communications

1 Answer

...radio is a Galaxy DX 98. It squeals when I key up change "MIC" to a factory,or turn back Mic gain. Mic can short out or may have too much gain(power mics). Use standard dead Mic that was designed for ...

Ad

...mic..no change...new antenna...still no change..could a soldered connection have broken on the circuit board..? my cobra 29 recieves but won't transmit..needle don't move when I key the ...

Ad

...power when turning on. if i put pressure on the side of the mic connection at radio face it will work.but not always. cobra 148 shows no wattage output on external meter but does show good

Question about Cobra Radio Communications

1 Answer

...change mic ,maybe the problem are in this mic ,second if the mic is ok verify all capacitors in the modulation near of this ic ,if all are ok change the modulation ic and change it, i hope this help ...

Question about Radio Communications

1 Answer

...ohm mic and wiring it for that radio will make a large difference in audio and how the radio sounds on the other end. There are other options as well but I would need to know brand and model

Question about Radio Communications

1 Answer

...change the chanels from the mic so long as I can use the power mic im ok with it. Thanks Charlie according to the schematic I just looked at the mic for this radio is a 5 pin. As long as it is a plug ...

...this radio doesn't have this type of key circuit can you help? Have you recently changed mics ? if so it is wired wrong, if not I would check for a shorted wire in the mic connector or the mic

Question about Cobra Radio Communications

2 Answers

If you get no switching DC voltage on the regulator then its bad and needs replacing there is also a known bad capacitor in the radio thats only 10 volts change it to 25 volts at the same capacitance

Question about Radio Communications

1 Answer

radio squeals part time and meter only goes up half way when keyed up you have a Microphone problem.. change your Mic. Mine done the same thing when Mic wires shorted together inside of the handpiece.

Question about Radio Shack Radio Communications

1 Answer

...radio. The only thing the extra 2 pins are for is to change the channels with the mic. they are not necessary of operation of the radio. Also, you have to make sure the mic is wired for the radio you ...

Not finding what you are looking for?
Ranger Communications RCI-6900F-25 CB Radio Logo

46 questions posted

Ask a Question

Usually answered in minutes!

Top Ranger Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Ranger Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...