Whirlpool WFW9400S "hook air tube" Questions

Ad

...tube from the air dome and blow through it into the water level switch to reset it. Then set the machine for spin and run spin cycle for 1 minute. Then try your fill again. If it does not work this ...

Ad

...tube off the tub and Blow in it while the machine is hooked up and running. If it continues the cycle you have an air leak right there where it hooks to the tub. I had this problem and changed about ...

Ad

Question about Kenmore Washing Machines

1 Answer

...hook that little air hose on the bottom of the machine back up. Sometimes we take it off the bladder of that level switch. If you've had either the head or the body off this machine, I'm going to say ...

Question about Whirlpool Washing Machines

2 Answers

hook upto. part roughly 39.99-89.99 labor 75-125.00 depending on were u live and who u use. if you decide to do it yourself i would say a 5 on a scale of 1-10 . turn water supply off, remove both hose

Question about AEG Washing Machines

1 Answer

hook 120 volts via an extra power cord to the valve. I recommend you crimp the proper connector to the end of the cord and plug that onto the valve. You can also use Alligator leads, but this comes at

...air traveling in the tube at the back right side of the machine. The cooling of that air stream causes moisture to condense and join the added water, which is periodically pumped out the drain. It ...

...is not plugged or partially block be sure vet tube in back is not compressed flat or folded basically be sure you have good air flow to outside to take the moisture to the outside away from the ...

Question about Washing Machines

2 Answers

...hook up to on the machine can start to leak over time so i would try to tip the machine on its side AFTER YOU UNPLUG IT OF COURSE and inspect all hoses and the other items that i have mentioned and ...

Question about Washing Machines

1 Answer

air pressure line, that, once the water reaches a certain level, the pressure in the line shuts water valve off. Should hook into the main control dial. Check that the line is attached, or not kinked!

...air dome tube that connects it to the tub. On washers that use an electronic control, this switch may be located at the sump area below the tub. As the water fills in the tub it will compress the air ...

Not finding what you are looking for?
Whirlpool WFW9400S Logo

65 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...