...washer tub i need to know how to level the tub of a kenmore 80 series washer you dont level the tub, level the feet on the bottom of the machine I recently had my machine serviced and the tub was ...
Question about Whirlpool Washing Machines
...tub on the rear left facing washer its like a clear hose about 1/4" dia. or you could of bumped the pump and broke it. it is located on the motor at the very bottom of the machine front good luck and ...
Question about Frigidaire Washing Machines
...washer when you look at the machine is there a mechanism that holds the machine in the center. Also my dryer has stopped spining , When i close the door and hit the button the motor wants to turn but ...
...washer, it is a little over a year old. I believe that the drain line is plugged. Looking at the back and bottom of the tub, (i took the back off) i believe that the tub is full of hair and dirt that ...
Question about Frigidaire Washing Machines
washer tub is stabilized by a number of springs that are attached to the frame of the tub and base of the washer. Make sure that the unit is loaded evenly and that the entire laundry center is leveled
...washer leaks occasionally from the back Sometimes my tub gets too far uncentered and when the water fills it hits right on the top of the white piece along the top of the tub instead of dropping down ...
...tub seals to going bad I would recommend a qualified service technician come look at it to rule out which one it is if your centers tub seal is bad I would buy a new washer but sorry for the
...Washer and the tub goes off center. When it fills with water or rinses this causes the water flowing our to hit the top of the tub on the backside and water drains and leaks out the bottom of the ...
Question about Kenmore Washing Machines
washer Tub appears top be off center after move upstairs Washer Tub appears top be off center after move upstairs. How do I remove cover to check? kenmore washer model # 100.24812200 Check the ...
...washer tub that moves the clothes around while they wash and rinse. Well if you have a washer that is a top load the agitator is in the center with 2 or more plastic fins on it so when the washer is ...
629 questions posted
Usually answered in minutes!
45 Questions
