Washer will not turn on. Started out that the washer would shut off during the cycled. Bang the front of the washer and the washer would allow you to turn it back on. Now it will not turn on at all. ...
washer and turn the water valves on. If the washer is filling with the washer unplugged the valve is bad. Part number 22001196. Not a hard job. If you need help installing, just e-mail the cat here at
Question about Whirlpool Washing Machines
...turn the water valve off to the washer. The Cold cycle works fine and even when I put it to Cold wash and turn the hot valve on it starts to fill immediately. It doesn't seem to be a water level ...
turn the washer on. The residual pressure will be released. Then you can turn the washer off and remove the hoses. This is a common occurrence. When you turn the tap off, high pressure water is stored
...knob on. It or the timer knob may need replaced. Here is a picture of the timer knob and the spring clip. Sure hope this helps and best wishes. MY WASHER TIMER KNOB WILL NOT TURN TO START MY ...
washer wont work filled washing machine with clothes and turned on the washer to fill up with water. as i turned around to put something else in the washer, the lid slammed down and now the washer ...
...washer and see if you can manually turn the pump/motor belt. It could also be the motor but I would check to see if they turn. If not, remove the belt and manually try to turn each and see if they ...
Question about Frigidaire Washing Machines
Washer starts then stops how do you reset the washer front loading Model # LTF2940ES0 Try turning off the circuit breaker for 60 seconds and turning back on again. Then turn on washer.
629 questions posted
Usually answered in minutes!
45 Questions