GE Profile WPRE6100G Top Load Washer "remove agitator prodigy" Questions

...remove the agitator? Open the lid, remove the dispenser assembly, then remove the bolt that is down in the agitator and lift the agitator out of the machine. Here is a link to a step by step video. ...

Prodigy WPSE4200A does not spin or agitate. The pump does work during all cycles. The belt is intact, and I tried to use the LED lights in the field service mode, but found the chart confusing. Thanks

...agitator, and lift really hard straight up. Be sure not to hit yourself in the head when it pops loose. GE agitators just snap on to the air-bell underneith. Be sure that bell isnt loose after you ...

prodigy. About 10 years old. No other problems. bad dogs pull off center cap remove bolt carefully lift off dogs are two pieces that catch to agitate they are minimal cost and are easy to replace they

...agitator off ? the top comes off some unscrew and some just pull off when its off you might have one other piece to remove to uncover the bolt that holds it in just be careful not to break anything, ...

prodigy wpse4270aoww won't rinse or spin Washer will fill, agitate, but won't rinse, empty, or spin. It just sits there and hums. Got a solution? try to clean out the water pump lines from pump to out

remove agitator off of a GE Prodigy Hi. The agitator is fastened to the agitator shaft and its movement is driven either by splines or a simple clutch assembly, which is removable as well. The splines

...has black grease in the wash water my clothes had black spots on them after being wash. I removed the agitator and there was grease The grease comes from the transmission. Part 320 on this ...

agitator drive collar and remove it. If you can not turn the splined transmission shaft with your fingers you are in luck and should be able to just replace the can shaped agitator drive spline. (part

...yesterday...today no spin. your lid safety switch under the top cover and lid is bad,you need to remove control panel and front and top covers to ...