GE Profile WPRE6100G Top Load Washer "frozen agitator washing machine" Questions

agitator is frozen filled with water, agitated for a bit then loud buzzing noise (from left front corner (as you face it) I think) and now the agitator is frozen in place. Tried to move by hand, ...

...off a ge washing machine this should be a big help..remove agitator first ,if frozen hit top of agitator back and forth to losen it ,,,remove agitator coupling and you should have it,,,good ...

...agitator will not release appears to be frozen onto shaft. replaced bolt and left loose tapped bolt head with drift as agitator was lifted without success Had to cut agitator away leaving metal boss ...

...agitator frozen Hello, The agitator will not budge at all, and when turned on there is a lound noise, maybe from the motor. I checked the pump and motor coupling and they are fine. Is this the ...

frozen or stiff replace it. If the pump belt is broken or looks quite warm, replace it but be sure to check the pump pulley before you change the belt. AGITATOR: If the agitator won't turn, the likely

...agitator is frozen--may be bad bearings (and the source of the noise). If a front loader, the tub main bearing is probably frozen, again the probable source of the noise or maybe the drive belt was ...

machine will fill and drain put not agitate or spin. If it is agitating then you could have a severely worn clutch the tub spin tube could be frozen in place. Try spinning the tub by hand. If it turns

...seemed to be frozen. Any suggestions? Sounds like a transmission problem. It's locked in agitation mode. When it is in agitation mode you can't turn the drum or move the agitator. I'd check that

...Could this have anything to do with the pump? Any suggestions? Thx Your washer probably has a frozen pump pulley or a broken pump belt. To check the pulley you should remove the pump from the ...

...agitator is frozen, water fills and drains. Have had the agitator repaired before, simple things like clips. Is this worth repairing? it's your money 20 year old machine is repairable but then you ...