Samsung RS2630AWW Side by Side Refrigerator "reset temps reading" Questions

...& forth from set temp of 33 to 53. That stopped; temp reads 33, but light won't go out. Look for a reset. Some units require some type of action to clear an alarm and you might need to find the

I have a turbo air tsr 49sd refrigerator. no error codes. temp continually reads 39 degrees after reset, condensor and evaporator are clean, fans are working. always resets to 49 degrees which is the ...

inside lights on but temp gauage says - has two temp gauges side by side in front at top inside, they both read -. Model # is ABB2524DEQ and S/N is 1055011GA try unplugging the unit. then resetting ...

freezer reads 0 and fridge reads 40 when you try to adjust temp. it will reset and power on again Those readings especially for the freezer are normal. why you are getting a reset is strange. Use ...

...reset it works just fine temps go down for both sections until something causes it to stop cooling and then I get a reading of -2 and 44 for temp readouts which is inaccurate, Restarting system ...

...reset unit and fridge not cooling down . Samsung French door I had a similar problem, paid a technician $90 to tell me to defrost the entire unit for 15-20 hours, and now it works like new. It is ...

...reading on open selfs in frig is 28-30 degrees with panel setting at 46. Is there a way to reset my control panel to read correctly and to help control my freezing problem the probe from the temp ...

...4C. I came into work this morning and everything is frozen. I don't see a thermostat to adjust or reset temp. How do i adjust the temp? There has to be a control somewhere on the fridge. Some newer ...

...on front door, currently reading 88 and flashing. try to reset your unit or unplug 3minutes then restart unit. or check if it has a busted fuses replace it. if problem persist replace main pcb ...

...is stuck on 46 degrees refrigerator/ 6 degrees freezer. None of the buttons work. Is there a reset button? press display on or (activate control) button first you should then be able to choose ...