Technics SL-1210 Turntable "platter start" Questions

start/stop button doesn't move platter I have Numark TT1's and the start/stop button doesn't move platter nakered switch then needs replacing CHECK TO SEE IF THE SCREWS HOLDING THE PLATTER TO THE ...

start the platter started to spin, but then stopped. I quickly turned it off and rotated the platter by hand. I heard and felt something on the underside of the platter scraping on something below it.

Platter Grinding Noise on Aiwa PX-E860 I started notice a loud grinding noise from time to time on the back of the music and now the noise is continuos. It's coming directly through the mechanic ...

...To replace a drive belt. Before starting unplug from mains power source. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and ...

platter and make the turntable cycle though a powered start/stop cycle to make sure it works. If it's not too late, avoid touching the drive surfaces of the belt with your bare hands as oils from your

...belt To replace a drive belt. Before starting unplug from mains power source. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and ...

...turntable drive belt. Before starting ensure you disconnect the power supply. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and ...

...turntable drive belt. Before starting ensure you disconnect the power supply. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and ...

...worn. To replace a drive belt. Before starting unplug from mains power source. 1, Remove the rubber platter mat to expose the platter. 2. Put your thumb and forefinger through the two round holes and ...

...start putting it on the big one, whilst turning the turntable! try that To replace a turntable drive belt. Copyright.. Styluscity.com, John Harrison. Nov 2011 Before starting any work on ...