Question about Technics Audio Players & Recorders
solve w/out buying new units? Thanks in advance for help!! More then likely the pitch controls need cleaned. Try cleaning with a good lubricating spray like Craig's Deoxit
Question about Technics Audio Players & Recorders
...pitch control apart, and clean the contact fader inside. Desoldering is required for this. But it's a more thorough cleaning. Helpful tips can be found here: www.djproaudio.com/Help Or, you can just ...
Question about Sony Audio Players & Recorders
...pitch for an album and the turntable sped up and can't be slowed down The pitch control need to be cleaned. You will have the remove the bottom to do this. It will require servicing. It could also
...responsd [email protected] You more than likely have to have the pitch control replaced or cleaned. - OPTiC Technics Repair Videos Technics DJ Repair DJ Equipment Sales Technics ...
...clean the pitch control sliders??? ok ive also seen this problem many times and i have solved it many times also by simply cleaning the contacts (metal strips) i use "servisol super 10" switch ...
Question about Numark Audio Players & Recorders
...fine but it is very erratic when slowing down the pitch... any suggestions? Fader has to be ether cleaned or replaced if cleaning did not
...clean out the pitch sliders on my mk5g's ,,,do i do it the same way as i did on my 1210mk2 from under the base or can the slider be taken out through the easy access panel on the top ? also if i ...
...bounces back and forth it doesn't stay still. Please advise You have to have the pitch control cleaned or replaced. - OPTiC DJ Equipment Repair Videos DJ Equipment Repair DJ Equipment Sales ...
Question about Technics Audio Players & Recorders
[email protected] If you've determined it's not the pots, and you've already performed a thorough cleaning, there are only 2 other issues which would cause this... 1) Faulty Pitch Control Fader - ...
...pitch besides it... first clean it and then you put your pitch fader in the middle and turn it with a screw driver, put your platter on the unit, the plastic black plate you only have to unscrew and ...
355 questions posted
Usually answered in minutes!
254 Questions
185 Questions
116 Questions
103 Questions
97 Questions