Panasonic Technics SL-DZ1200 Turntable "jam" Questions

Hi, I have a jammed height adjuster on a Technics SL1200MK2. Does anyone know a way of fixing this? Quite often grit and dust gets into the thread and jams it up. If the deck was in my workshop I'd ...

rca 5disk changer would not work after breaking disk You may need to take the top off check for broken disks pieces or anything jamming the disk carrier. reset the tray and press eject. Hopefully this

technics SL1200 Starts when I turn the power On. No need to press start! A small micro switch has jammed in the on position.

mount. Remove stylus and play with arm and simulate turn on cycle to see how it works and where the jam is- fix and then put stylus back in - those little suckers are expensive

CDJ800MK2 problems upon loading disc, one on my cdj800 mk2...reads the cd, but the turntable will not spin. (The Play buttom seems to be stuck?) gives a code E-8380 Code E-8380 is a read error. Either

no audo/no disc not loading disc Do you receive any disc errors? Or does it just not even load/accept the disc? If it does accept it, do you hear the cd turning? Make sure you dont have anything ...

platter wont spin on stanton t 120, all the lights turn on fine, platter seems to feel jammed, it wont spin easily when i push it by hand. The belt that drives the platter may have shifter or the ...

...the belts the wrong size or put on wrong, if it doesn't spin then you better get your butter & jam out, to put on your

1960's HMV stereogram won't change speed. Stuck on 78, how do I fix this? Turntables this old use a rubber tyre pressed against an electric motor. The tyre is connected to speed control by some rods. ...

How do I get the turn table to move into play position How do I get the turn table on When you say the 'turn table into the play position' I assume that you mean the stylus arm (that holds the needle)