...MOTHER BOARD.( EMACHINES T6534) SO BY THE TIME I WAS WAITING FOR THE CARD IN THE MAIL. I WAS HAVING PROBLEMS BOOTING MY SYSTEM.I PUT THE CARD IN AND WAS DISABLEING THE OLD ONE IT SMEARED AGAIN AND ...
Question about E-Machines T Computers & Internet
...MOTHER BOARD OF MY EMACHINE NO POWER ON MY EMACHINE i HAVE REPLACE MY POWER SUPPLY BUT I HAVE 3 WIRES THAT RUN FROM THE FRONT PANEL HDD LED POWER LED AND POWER AND DON'T KNOW WHERE THEY GO TO GET ...
...mother board. Still a no go. Ohmed out the power switch; it's good. When I did plug the pwr connector back to the mother board, the mother board fan and the power supply fan will come on if I jiggle ...
...mother board lights up. als accidentaly disconnected the switches wiring to the mother bouard from the power button on the board. Also should not make a difference as long as the new power supply ...
Question about E-Machines T Computers & Internet
...mother board may be screwed up also? Any chance of resetting the mother board some how? Were the power supplies compatible (ATX etc)? If they are try pulling out the ram and see if you generate any ...
...mother board went bad changed with another emachine mother board of diffenet model. Downloaded the sound and video drivers and installed the driver from safe mode becuse the os kept asiking for them ...
Question about E-Machines T Computers & Internet
...mother board. here's how you can confirm. When pressing the power button, inspect the cooling fan that is located on the back of the power unit where the power cord plugs in. if the fan starts then ...
Question about E-Machines T Computers & Internet
...mother board model T2892 T2892 or look where the ram is it will be printed on the board . Tip. dont replace it with an e machine board try to find a differant one these are made by pc world,commets ...
mother board. This is a common problem with these models...do some search on the web. Best maybe to replace the mother board with a same size board. You may have to re-install windows over your system
Question about E-Machines T Computers & Internet
mother board on. when pluged in the fan runs for a couple seconds and turns off.power button has no effect. sounds like a mother board issue, start with pulling out all ram chips and re try,, then try
2 questions posted
Usually answered in minutes!
167 Questions
87 Questions
63 Questions
48 Questions
49 Questions