Samson SX1200 Amplifier "watts stereo" Questions

...watts/channel which is your average consumer stereo system I would use 8 or 16 ohm speakers (not 4 ohm) -- almost any set of stereo speakers will "work" -- these will be 8 ohm and about 5 ...

watts @ 8 ohms each... please suggest what will be the best connection...series or parallel first is how u want to run the amp itself ....... the MAX2500 can run in mono (bridged) output or stereo ...

Technics SU-G95 stereo amp has two burnt resistors, R703 and R704. I found, online, that they were 10 ohm. I called a store to buy them and then I was asked what wattage they were? 1/4, 1/2 or 1 watt?

...watts does the transformer has to have? 8 Ohm Stereo - 1150 W 4 Ohm Stereo - 1800 W 2 Ohm Stereo - 2750 W 4 Ohm Bridged - 5500 W What you need is simply a power converter device that knocks the power ...

Stereo mode, 4 ohms in Bridge-Mono modeVoltage Gain to 1-kHz, 8-ohm rated output,CE 1000: 30.5-dB gain at 1.4-volt sensitivity;26-dB gain at 2.34-volt sensitivity.CE 2000:32.1-dB gain at 1.4-volt

Dear sirs, I have NAD Dear sirs, I have NAD ''Stereo Intergrated Amplifier 312'' Could you please tell me how much is the output power of this unit. 2 x 25 Watts continuous power (8 ohms)

just need to look at rear panel please as per your request:sources:P Series Power Amplifiers [English / 245KB]Yamaha P2500S Stereo Power Amplifier, 350 Watts at zZounds

...4 - 250W subs with 4 tweeter and 2 trumpets? I have 4 - 250w generic subs with 4 tweeter and 2 trumpets and i was wandering with amp is the best. a 300 watts stereo amplifier can able to drive

...your amplifier, if you plug in a speaker that's more than the channel, it could harm your amp. for example a 200 watt stereo, with 4 channels that equals 50 watts per speaker. Hope this helps you ...

...CS-800 Amp (800 Watts) ... Peavey CS-800x 800 Watt PA Stereo power Amplifier. The Part in question Q4025P is an alternistor. Two SCRs back to back that may have shorted out if it is not