Sansui DTV2760 27" TV "flyback resistor problems" Questions

resistor be located and approximate value. I dont realy know about this model but in many other model is a 1 oms resistror and is located around the flyback becouse the b+ for vertical output is taken

...no high voltage supply.Ethier the flyback is faulty, and if the brightness come up, the problem is the cathode supply.There's a open resistor near the flyback,supply through the CRT socket

...resistor r4704 82k hooks to pin 4 of flyback @ to ground.r2709 27k hooks to pin 4 too. @feeds to ic u1001 pin 31 beam sense in .hope you can help me. thank you . ED the resistor you mention is from ...

20f514td rca has no focus. I TURN FOCUS ON FLYBACK BUT IT DOESN'T GET IT IN FOCUS. I CAN TURN IT DOWN IT ALMOST GET DARK. I TURN IT UP BUT IT NEVER GET CLEAR. THANK YOU Either the flyback or the ...

...Good luck, - Jim Shorted cap Location # 3213 = .01 / 3KV Shorted diode # X3204 = NTE 519 Burnt resistor R2925 = 1K 1/2 watt Flyback usually

...flyback along with a diode.there is also a resistor in the same area that you need to check.if that does not not solve your problem take out the microchip the number on the board is 506 when that is ...

...flyback transformer.If their is no 24v get the resistance of the fuseable resistor and rectifier diode.Usually the resistor opens and the diode create short circuit. B.)For most, make sure that their ...

...the chip failed it got a resistor between it and the FLYBACK which is where the approx 30 volt source comes from for vertical---follow it to the xfmr.--there will be a open resistor in that

flyback, also the resistor, and cap that came with new flyback. Now I get sound but no picture. I can feel the static on the front of the screen and the picture tube is coming on. Is there a setting I

voltage which can be caused by leaky or bad capacitors, also you could have a resistor bad that feeds over to high voltage,no picture means you have lost of high voltage to or from flyback transformer