Nespresso Aeroccino Automatic Milk Frother "coffee stay hot light goes" Questions

...coffee maker to stay on for 4 hours, have tried all temp settings from 1-6, and there seems to be no change. There is a button that shows three wavy lines and I don't understand what it is, but when ...

...stay hot Hi, when you run a coffee through, the temp light goes out before you have run enough for a double shot.We have had our unit for 18 months and I have never been happy as it has never been ...

...light to should flash and the cycle to green when ready. If the water is already hot enough, when you close the latch, it will flip right to green. Give this a try. Also see my solution to my own ...

...light, which indicates that water is not hot enough, does not go on). The boiler loses pressure. If I wait long enough (more than 5 min.), the green light goes on, the heating element brings water ...

Coffee Maker purchased from Walmart, Niagara Falls, Canada. has a defective switch. When switched off the hot plate remains on, even though the switch light goes out. Model#XQ582. "Durabrand", Quality

...coffee can be made or hot water. I could not pump prime. The problem was the steam wand was blocked with old milk residue. It needs unblocking or you will never pump prime. I could not unscrew the ...

...Hot water willcome out of the milk frother and fill the container underneath.• when the tank is empty, the light goes off and the lightcomes on (chap. 12 - point 1).• turn the steam knob all the way ...

stay on. It needs to go off before the machine can start heating. I turned the machine off and on and that didn't help. Finally, I just assumed it needed to know that there was water in the tank, so I

...coffee spouts or the steam wand. The word they use for this is "pump priming". Thus, either the motor is not sucking water in or there is blockage. Unless water gets out to the other side, the red ...

...light when attempting to make hot milk froth. My cold operation (blue) was also working fine. My uint was also super clean and had no buildup. Here is my fix: You need to take the unit to a nice work ...