Philips Senseo HD7832 Coffee Maker "float magnet" Questions

...magnet float fall out. Remember to empty the water first. Here comes the highly technical part. Turn the magnet float upside down and slide it back into the float chamber. Since the actual magnet is ...

...float has a magnet. the machine senses the position of the magnet and indicates water ok/not. sometimes the magnet rusts inside the plastic casing, renders it less magnetic so it wont work. or the ...

...The pot is full but won't stop blinking and won't make coffee. On the Breville XL600 the floating magnet stops the blinking lights until it doesn't after 10 years of delicious coffee. Why, ...

...magnet float from its chamber to clean it. The magnet float may simply become stuck or may not move freely in its chamber due to a buildup of residue or foreign material in the chamber. Remove the ...

float when connected to the magnet and the light will stop flashing red rapidly In addition to this comment, If you have lost the tiny circular magnet from inside the centre of the black float in your

fill watertank plenty of water still "fill watertank" float valve stuck. try unplugging and then empty tank.check to see that nothing is visable in water reserve. fill water tank to full and then plug

...float in the water container and a magnetic reed switch behind the plastic inside the keurig.  The magnet on mine eventually wouldn't close the reed switch consistently.  First I melted ...

...float with a stronger magnet or building your own float, or a new tank is about $30 & comes with a new float. (Note, if the problem is that the switch needs more pull, a new tank/float will not ...

magnet in where the float would be along side in the tank area this should turn the sensor off( red light will stop flashing) if this works it will be the main power board out of alignment, if this is

...float anymore, you have to replace it. Remove the top cover of the small tube where the magnet floats, replace the floating magnet and replace the cover. If the cover doesn't seat properly, glue it ...