Connex 4600 Base CB Radio "power microphone works best" Questions

power (watts) because you have less swing. Example: with my talkback turned off, I can adjust my audio to 100% and I swing 400 watts. When I turn my audio down to 75%, I swing 250 watts. So the bottom

microphone propably your best way of upgrading any system and decrease the squilling issue that you have but expensive worth every penny $130 to $165 depending on where you get it the ultimate mic for

...microphone and at the same time turn the set knob on the swr meter until the needle is at the line that reads set. Unkey your mic and set the the swr meter to ref. Key up again and note what your ...

...power ull have talk back through you trucks radio speakers and it needs to be hooked up to the battery with at least 12ga wire Every tech. knows and every Connex owner Knows that once a Connex has ...

...microphone! The best microphones are the RK-56 and or the Astatic 636L which most people use and you shouldn't get any squeal. And make sure if that you are using an external speaker get it as far ...

...power microphone? If so you need to use a modulation meter to set it for 100% modulation. It could also be causing the crackling, that or your engine alternator. A 1:1 SWR implies a perfect match ...

...power output, set it to HIGH when doing SWR calibration Hope this be of some help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. First ...

...microphone and at the same time turn the set knob on the swr meter until the needle is at the line that reads set. Unkey your mic and set the the swr meter to ref. Key up again and note what your ...

...power scale switch set to 10 watts. You then key the microphone. You should see a carrier (dead key) of about 4 watts. To check for proper modulation, you should then speak into the mic at a normal ...