Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher "removing tub screen" Questions

Ad

Question about GE Dishwashers

1 Answer

...tub. Remember, these dishwashers aren't bath tubs. Those seals are only designed to keep water from splashing out, not for completely filling the dishwasher with water. These problems are both caused ...

Ad

...flash You have a piece of debris stuck in the impeller of the pump. Food, glass etc. Remove the screen bottom of the tub and clean. Might need to shop vac it, or remove the pump to get the debris ...

Ad

Question about GE Dishwashers

2 Answers

screen filter at the back/bottom of the tub then it could be a piston and nut problem. Remove the screen filter assembly and the piston and nut. It unscrews from the floor of the tub. Check that it is

Question about GE Dishwashers

1 Answer

...tub. There is a filter screen along the back that you need to remove useually with 1/4 " socket or nutdriver and you may half to wiggle it around the heater ..... once you remove the plastic screen ...

Question about Dishwashers

1 Answer

tub in siside at the bottom, under the long screen . remove long screen. in the centre is where the piston & nut is located . unscrew part & replace. thanks the appliance doc. if happy with my answer,

Question about Bosch Dishwashers

1 Answer

No water coming out Making a grinding sound with no water coming out something stuck in your pump? you may be able to get to it from the inside of the tub.remove the screen and check under it.

Question about Whirlpool Dishwashers

2 Answers

...tub when the cycle starts? john, the dishwasher has a timed fill, make sure you are using 3/8 inch line. If you are using 1/4 inch, that would be your problem. The fill should be just below the ...

Question about GE Dishwashers

1 Answer

screen and look for debris where the hose connects to the washer. Clean as necessary. Remove the front access panel from the washing machine and locate the drain pump. Remove the screw clamp and clean

Question about Kenmore Dishwashers

1 Answer

water standing in tub,already removed cleaned screens,also drain hose is not plugged,can feel spindle spinning on pump out motor.Would impeller be shot??....thanks Hi, Here is a tip that I wrote that ...

Question about Hotpoint Dishwashers

1 Answer

...There is a piston and nut assembly under the screen going acorss the back of the inside tub. Remove the screen and replace the piston that screws in the middle there. WD24X10018. Less than ...

Not finding what you are looking for?
Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...