Question about Whirlpool Washing Machines
...washing machine starts sensing the load, then it displays the message 'Compartment II w37ml' or 40ml and then pauses the cycle and that is it. It's not washing. I cancelled the cycle and disconnected ...
Kenmore 25102 stuck in sensing mode Machine stuck on sensing mode
Question about Washing Machines
...sensing mode. What do I do? have a really good look to see if there is a reset button on the machine check your manual for it as well press it once that should reset the machine then it will put the ...
Question about Frigidaire Washing Machines
...sensing mode. when I put it on any cycle and click start it begins the cycle and says sensing then it never leaves from sensing mode. I ran diagnostics and went through each cycle and when I got to ...
Question about Maytag Washing Machines
...button it begins its sensing mode locks lids and doesn't go pass this mode. Lid locked lit keeps flashing and sensing lite stays on Most likely actuator is bad or drain Pump is defective or ...
Question about Simpson Washing Machines
...washing machine keeps switching off mid wash. It turns on like normal and I can select the wash cycle,it fills with water but sometime during the cycle the machine loses power, and then the power ...
Washing machine will not fill with water Water inlet solenoids is the usual problem.
...mode by accident and is currently stuck on sensing mode. Not advancing to wash. May have to reset your washer to default mode or unplug for a few minutes then plug back in. It should work after
Question about Washing Machines
...Machine stays in the sensing mode, does not go to wash mode. Just fills with water on and off for awhile. The most common cause of this is a defective washer lid switch. Follow the link for a repair ...
1,529 questions posted
Usually answered in minutes!
2,660 Questions
974 Questions
650 Questions
256 Questions
168 Questions