Dell Dimension 3100 PC Desktop "video motherboard" Questions

motherboard is for a dedicated video card and a onboard video card. The computers with a onboard video card have a UMA mootherboard and the ones with a dedicated video card have a Discrete motherboard

...motherboard)? Is the video card built into the motherboard? If not you can try replacing just the video card to see if that works. Otherwise I am afraid you may have to replace the motherboard. you ...

...video card shot?how do i determine the exact motherboard in this unit? first see if it does this on other monitors and if it does then there is either a loose connection, a busted prong on the vga ...

...any built in video capabilities of the motherboard when a separate video card is detected.  Check the manual for additional info about these BIOS settings.I hope this helps & good

...motherboard), no video signal, removed harddrive and tried on another computer and got a video signal. if your num lock key responds, you may have to reseat/change the video card (if you are sure ...

...video card to a computer's motherboard, primarily to assist in the acceleration of 3D computer graphics. Since 2004, AGP has been progressively phased out in favor of PCI Express. Here is a link ...

...first.Then make sure your video card is seated properly.If it is on-board video(connected straight to back of motherboard)and these solutions don't work,you may be looking at a fried

...then the problem is your video card. If that the case and the video card is intergrated with the motherboard, you will need to repalce the motherboard --- Sorry-- Please vote me a 10 when this ...

...video card and Ram to the new motherboard. It is very likely your Ram is slower that most use now days, and your video card is unlikely to be the PCIe16 also used on modern boards. Sorry. you can ...

...VIDEO first check to see and smell if there is something burning. if so keep it powered off! I had to have dell replace my motherboard because of this! If you dont smell anything, you can add an ...