sub output Hello Selecting digital sound on a DVD to Dolby results full 5.1 sound - that is including output to the sub channel, however, selecting a DTS digital output results only 5 channel output -
...SUB output is DEAD I bough a 995 on craigslist. The sub output is dead. Yes, I have it turned on in the menu and have set to "both" mains & sub. I have tried different subs to make sure. I have a rxv ...
Question about Yamaha Audio Players & Recorders
...all 7 speakers playing. Disconnected the A speakers, still no output from sub with only B speakers selected, but get 5.1 with A and B selected. Try turning up the sub out-put, in the Receiver ...
...problem. Everything else seems to be working on the receiver, but I thought maybe I am missing something in the setup. Thanks in advance, dgh yes, you do have to set up the sub output in the
...Sub, no output I am trying to hook up a powered sub to a stereo receiver which doesn't have an output for a sub, how do I go about doing that? does the sub have speaker wires in and out run fronts ...
Question about Yamaha Audio Players & Recorders
...output for sub, so they are able to take already amplified signal as input. You need to use link-level input of your sub and connect it to subwoofer-output of your receiver. The output is marked as ...
...have a powered sub connected to sub out of receiver .Also you could also connect another type of speaker with RCA to make sure if it has output or not..Also make setup does have sub output ...
...sub output The subwoofer output is dead. I have reset the unit to factory defaults etc. The sub output is still dead. All other ouputs work beautifully. Overall, a good amp, just no sub. Help.. I ...
...output for sub-woofers in which case this is the best place for it because the higher frequencies will have been filtered out. Some high quality amplifiers like the JAMO MPA 101 have a filter switch ...
Question about Audio Players & Recorders
...sub-woofer output activated. You can check the sub-woofer output to see if it is activated thru the menu system. The solder connection being broken would need to be checked visually by removing the ...
20 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions