IBM Wheelwriter 30 Typewriter "series 2" Questions

...SERIES 2 - UNIT WILL NOT POWER UP AND WHAT ARE THE BATTERIES INSIDE UNIT USED FOR ? You probably need a power supply or a board. The batteries hold the settings when the T/W is turned off. ...

...Series II Under the shiftlock key there are four numbers l l l/2 2 3 all but one are flashing. The typewriter will not respond to anything. The book says Remove and reinsert the printwheel, look for ...

...Series 2 - Unserviceable What's available as a direct replacement for the IBM Wheelwriter 30 series 2 typewriter? A reconditioned WW 30 is available for 350.00 plus shipping. If you ship the broken ...

...Series ii typewriter that locks up with the 1, 1 1/2, 2 & 3 lights on the bottom right blinking. It will do nothing else. If it types at first then locks up try a shot of WD40 on the silver shaft ...

...series 2. wheelwriter 30 series 2. print type light yet it seems to be striking with enough force. Can I adjust the strike pressure some how?DM Put in a multi part form and type if the print is good ...

IBM wheelwriter 50 series 2 typewriter how do I stop the machine from double spacing ? press the line space key until the light under the number 1 key is lite

...series II 6783-2 Hardly any of my buttons will work, no return, no code, no anything except for the alpha keys? Check to see if the flat ketboard connectors are fully plugged in. If they are you ...

...Series II doesn't work When I turn on WW, there are 7 short quick beeps and lights 1 and 2 blink My repair book shows: 1 Make sure the printwheel in installed correctly. 2. make sure the ribbon and ...

Series II typewriter If you are asking about the print solenoid.  Remove thr ribbon, below the ribbon just inside thr L. printer frame.  It's about an inch & 1/2 in diam. and about 3

Series II 6783-2 None of my keys will work-other than the alpha keys? Check the connectors from the keyboard to be sure they are plugged in fully, check to see if you are in language mode (light on rt