Black & Decker HC306 Food Processor "remove blade" Questions

Ad

Question about Cuisinart Food Processors

1 Answer

...blade has been on and off many times, but lately has been difficult to remove. Now, it seems to be stuck on the shaft, big time. I used a large pair of pliers to attempt to pull up on the plastic ...

Ad

Question about Ultimate Chopper Food Processors

1 Answer

...remove from the base of the blender attachment for the ultimate chopper> Press and hold down the center shaft of the blade assembly and lift the blades straight up. You can go here: ...

Ad

...blade I couldn't figure out how to remove the safety insert either. I tried using a hammer as Don from Texas suggested, but it didn't budge.  I then examined how the slicer inserts were ...

Question about Cuisinart Food Processors

2 Answers

...blade I can not remove the dough blade in my cuiinart food processor. It is stuck! On the DLC 7 Pro cuisinart the blade was removed by removing the plastic bottom. Make sure the unit is unplugged. ...

Stopped & removed spoon, it continued to process food, but blade seems to be stuck on shaft, so I can't remove bowl or blade. You damaged the blade or bent the shaft, not sure how you could get it off

...slice food. There was no manual. Help, please? When you remove the regular chopper blade, it should fit on top of the stem. The chopper blade must be removed to use the slicer / shredder

...remove blade. First off, is it a BLADE that's stuck, or a DISC? If it's a disc, and the disc is blocking your access to the center post, put a ziploc baggie full of ice on top of the disc (right in ...

Question about KitchenAid Food Processors

1 Answer

...remove the work bowl or the stainless steel multipurpose blade from the base. It will be the blade holding the bowl on. The blade has become locked onto the motor shaft, in the end you are going to ...

Question about KitchenAid Food Processors

1 Answer

...in, thus locking the bowl down. Either remove the blade first by rotating it counter clockwise, then up or move the blade back 1/10th of a turn after rotating the bowl as far as it will go

Question about KitchenAid Food Processors

1 Answer

...remove the chopping blade from large bowl The blade will be stuck on the shaft and both will be damaged and require replacement. With that knowledge you now understand that drilling a hole sideways ...

Not finding what you are looking for?
Black & Decker HC306 Food Processor Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Black & Decker Food Processors Experts

Cindy Wells

Level 3 Expert

6199 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34997 Answers

Are you a Black & Decker Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...