Maytag EPIC MFW9700S Front Load Washer "penny stuck under washing" Questions

penny stuck under the white spinning things. There is a penny stuck and the washer stops with water in it after it tries to spin. It makes a loud grinding noise and stops.. then we hear the coin drop.

...water pump have its own motor? please help it sounds like you have something stuck under the agitator thats causing a rubbing noise when it goes to spin or agitate.maybe a penny or something like ...

...penny and a nickel sitting upright in the space at the bottom of the tub between edge of the agitator and tub cause this noise Possible bearing failure but if only a year old, it should be under ...

...penny,nickle,dimes ect.)stuck in the drum some were, how do i get them out? You said "stuck" in the drum somewhere? Like under the agitator vanes? You should be able to take the lid off the agitator, ...

stuck between drum and baffle of our Electrolux front-load washer soon after purchase in 2014. I went through the same exercise trying to remove the baffles but finally figured it out four years later

...penny stuck under the white spinning things Some other links if you want to DIY the fix; The Service Manual for reference. Sears Parts Direct for reference. If you need additional help post back. If ...

stuck footing the bill, not you. On the other hand, if you were to go out and replace ANY parts on your washer and they go bad, who will you turn to, to claim a warranty defect for the part if it goes

...penny's stuck in the out going hose which stopped the flow. Took the hose off and found something long a ridged and after many attempts of twisting the hose and shoving the rod down the hose I had 30 ...

...stuck on full f06 lights 2&3, N/A? f07 lights 2&3&4 heater relay f08 light 1. heater relay f09 lights 1&4 eprom/setup error f10 lights 1&3, pressure switch not sensing f11 lights 1&3&4, pump/draining ...