...the sock ...once it has caught the sock, then twist it a few times so that it will get caught up in the sock really well...then pull the sock out of the hose...Job done. Please take time to rate ...
sock has become caught between the wall of the clear bin and the shroud, this is simple to access and remove. With the bin base open as if you were emptying the machine, press the catch on the cyclone
...sock caught up by the handle. The hose has electrical wires running through it so I cannot cut the hose. Usually a plugged hose can be cleared using a broom handle, if you can force the blockage ...
...model you might need a new agitator (brush). if you caught something on it like : shoe laces, socks or anything that stops the brush. you should see on the brush were the v-belt goes burn marks ...
... push it into the hose and collapse the hose on the handle as far as you can. (Think crinkling your socks to pull them over your feet). You'll be doing much the same as you pull the hose up onto the ...
...sock. I tried to put a long dryer wand down it but the hose is just too long. Does this need a repair man or new hose?? Any idea of a way to blow it out? Thanks. The best way to clear an obstruction ...
...caught the corner of a blanket with fringe. I stopped it the minute I knew something was wrong. I pulled the item out, and now the beater bar doesn't work. Is there a reset button, as the powerhead ...
Question about Vacuums
...caught on a sock I didnt see now its making a horrible knocking sound I was vacuuming for only the 2nd time since I got this vacuum for christmas I didn't see a sock in the corner and it got ...
and my vacuum stopped working The sock could have caught in the roller area and / or plugged the suction hose. most likely you will need to gain access to the roller area to loacte the sock. good luck
1,106 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
655 Questions
597 Questions
450 Questions