Question about Hoover Vacuums
The seal on my recovery tank seal on my Hoover steam carpet cleaner has come off. I put the rubber seal back on but the back part, where the two pieces of seal don't connect. You can usually stretch ...
Question about Electrolux Vacuums
Need an Electrolux agent in Alberton, SA. Need rubber seal for my vacume cleaner Model A3017 black rubber seal from vacuum to pipe. Vacuum is strong, problem occurs when attaching the pipe. no *******
Question about Hoover Vacuums
...the round rubber gasket installed on the tubular post under the hood, where the tank seals to the base? The tube extending down from the tank must sit on the rubber seal to get vacuum from the
...Stem Assembly for Hoover Steam Vac I need assistance in assembling a valve stem with spring and rubber stopper for my Hoover F5897-900. Put the rubber seal on the bucket first, then put the
...like a bad belt and it is burning as the motor tries to turn the brush. Does it smell like burning rubber? hissing noise could be a crack,pin hole in the rubber seal, seal not sitting even. the hose ...
...properly. This was on an older system, so be sure the bags you're sealling are between the black rubber rectanglar sections before closing the door. If this is for a canister, be sure the rubber ...
...puddles, even when I am not holding down the lever to wash. Ok when replacing the Spring stem and rubber seal. Put the spring on the stem set it in the hole of the solution tank carefully hold it ...
...assembly -We have a Hoover Steam Vac model F5897-900. We purchased a valve stem with a spring and rubber stopper. No sure of the exact assembly instruction. Can you help me? This is a Hoover Steam ...
the black rubber seals on the handle will not seal to the tank. You may wish to look at this. Also, make sure both round black rubber seals are present on the flat mount where the tank valves will sit
...rises from the base to meet the bottom corner of the recovery tank. This rubber seal may have fallen off the tube and be found laying under the hood. It seals the vacuum source to the recovery
1,106 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
655 Questions
597 Questions
450 Questions