Kenwood KDC-135 CD Player "sub control" Questions

control for sub and other speakers, help me if you can. thank you. You need to go into the setup menu and find out if the radio has a sub low-pass filter that redirects the bass to the pre-out for the

type of deck is it? you are holding the audio button too long which sets it to audio settings. i guess you can only control one sub. even you have 2 subs connected, it is usually in mono configuration

sub control how do you change the sub control on the alpine cda-7863 Doesn't have one! Cheaper Alpine unit

get it back? I got a KDC-MP435U Press the control knob down for at least 2 seconds...this will toggle between sub on and off. If you accidentally turned sub off, it will not appear in the setting menu

...sub,and see the output. OR check the GAIN control on the amp.it should be 2/3rds of the max volume of the cd player.check it is not zero! AND Set the amp to the L.P.F. position. bye .happy

...where i can control the sub i looked through the manual and still couldn't do it did you connect the yellow wire from the radio to a 12 volt power supply that does'nt go out when you turn off the

...control is featured on page 17 (21 of pdf) In the Audio Sub-Menu: Subwoofer Phase Adjustment: Touch the sub.w icon to access the subwoofer polarity controls and reverse the subwoofer signal polarity ...

...sub On-Off According to the manual, you push the control know towards AM for 2-seconds and then the option to turn the sub On-Off is displayed. This isn't happening. I can't get that option to be ...

...do I get the SW control back ? Hold down the AM- button for a few seconds and the sub option will turn on and will be part of your equalizer and you can now change some extra settings on the sub

i want to wire subs into it and idk where the control wire goes from the subs for the radio to tell it to turn on You can download the instruction manual from Kenwood.com. The wiring diagram is on ...