Kenwood KDC-135 CD Player "pressed factory reset car radio" Questions

...factory serius radio. I subscribed but one day battery acted like it was dead. After cranking truck, I had to reset clock but now there is no satelite. when i press Aux. iget messege- No aux audio ...

...factory to reflash. turn of set at plug.press and hold backup on set(keep pressed) turn on at plug.keep backup pressed for about 15 seconds.all lights on set will flash.if you have tv tuned to set ...

...reset to the factory defaults. Some models may also have a small reset button on the front, either on the face or behind it. Use a paper clip or similar object to press this for 2-3 seconds. If the ...

...reset button then press the power button and it should work. I have a Lanzar radio. The same thing happened to me, as well. If you look behind the radio, you'll see a thick yellow wire, with a black ...

...and toggle to the 'on' position. Then the aux input should be available again. The radio losing power would have reset any internal memory causing it to go back to factory defalts. Hope this ...

...reset the factory specs but as I do not have the code to imput nor the method to use to imput the code this may be a waste of time. Any suggestions please? I have the same head unit and disconnected ...

...10-15 secs. Turn the control knob to "YES" and press ENTER key. If it still fails to operate properly press the rest button to return to factory settings(The reset button is behind the front

pressed If it's any consolation, I don't think the problem is anything that you might have done. Probably the radio just decided that today was a good day to die and you just happen to be there at the

reset to factory. 5. And you are now working again. Or you should be. It basically is a processor and it operates just like your home PC whn it needs a reload. It searchs to the default drive which is

...reset to factory settings, nor did I have to do step 3 or 4. Now the receiver is working just fine like nothing ever happened. All of the input AND output speaker channels all seem to be functioning ...