Mitsubishi Diamond WD-65831 65" Projection HDTV "inch tv cuts" Questions

Can a MIrror in a Mitsubishi DLP tv be replaced with a glass one from my local glass shop? Yes but it has to be cut perfectly and the ends have to have the same angle cut as the factory one or it wont

...tv does not turn on. I have done a system reset and removed power but it just keeps flashing. capacitors have failed. You can get the repair kit called the V26 Chassis DM/Power repair kit from ...

...tv works now! THANKS NEALS!!!!!!!!! 52 inch hdtv for less than $20 in parts! neals - Did everything you suggested and the TV works GREAT!!! You saved us over $300 for a silly repair that cost us less ...

...TV somehow (I drilled a ½ inch hole in the plastic cover to snake the switch through but you can do it however you like) Here is how to use it- From a fresh plug in- throw the switch to the OPEN ...

...INCH TV WHEN THE LAMP COMES ON THEN IT CUTS OFF LAMP IS NOT BLOWN BUT TV CUTS OFF have you checked to see the lamp cooling fan is working cause if it dosen't work then the tv will shut down when the ...

...the screen are not even on each side. On the right side of the screen, the vertical bar is about 5 inches but on the left it is about 7 inches. I have also noticed that TV shows that fit the full ...

...tv and cuts off 2 inches at the top and bottom. it gets really frustrating when a movie has any subtitles as you cant read half of what they said. you might have bad caps or the vertical output ...

one with a 73 in tv or bigger that they were no longer using or didnt work and i found a guy on www.ksl.com that had an 80 inch tv and we went to go pick up screen cut it to my tv size and it worked!!

...of days ago. The repairman change the bulb and my TV was fix in 15 Min. I too have a Sony 60 inch WEGA. Now that I know I can change the bulb myself, but there's a hazmat issue on the bulb. goog

...on 40 inch hd tv toshiba Depending on the model the set or a cable box may have an adjustment for this---simple thing to do also is hook to DVD player via rear inputs to see if same problem or