TruTech TT320 "unit" Questions

I can scroll the menu though and do all the setting, but I can't get out of it, so I can't use the unit at all. please some advice! you can get the remote from nationalpartsupply.com the lowest price

...in the read mode and will not eject Disconnect the Power Cord. Open the Case and go to the DVD unit. On the right side of the unit you will see an indentation which is the mechanical portion of ...

code u61 panasonic dvd recorder how to reset Reset the unit as follows: Press [POWER ?/I] on the main unit to switch the unit to standby. If the unit doesn?t switch to standby, press and hold [POWER ?

...sec . into play it turns off no reasosn turn the system on agen 15 sec turns off helppp I have this unit and I repaired it. ( I am a trained professional technician) History: I bought the unit used ...

...won't eject and an u99 error code is displayed. Hello It is an internal circuit problem. The unit fails to operate properly. Press [POWER] on the main unit to switch the unit to standby. Now ...

Unit turns itself on in standby mode The unit turns itself on in standby mode and starts playing a dvd by itself. Is there any way to stop this from happening? This can be a very irritating problem. ...

...keeps blinling and wont turn on. Dvd stuck inside the disc or mechanism may be jammed and the unit knows this, someone (most shops do this) needs to open the unit and safely cycle the disc out ...

no power.. The unit was flashing on the display screen 9 something it usually does not do). i could not switch on or off the unit using the remote or the actual buttons on the unit. After turning the ...

2 units have died. Possible power supply problem Hard drive work. Display screen is dim. Have replaced the battery. No use. When turning unit on, fan runs for about 4 seconds, then stops. Operation ...

...ensure this occurs on all discs. Then try resetting the player using the below instrucitions. 1. Unit power must be ON and unit must be in STOP mode. 2. Press and hold [CH UP] and [CH DOWN] ON THE ...