uniden bc 350a hi, the squlech wont work therfore it wont scan. it has been exposed to some high rf from my cb radio ( about 70 watts) after i keyed the mike, no squlech. i shut it off for about 3 mos
Question about Uniden Radio Communications
...UNIDEN BC 175XL base station 16 channel scanner. The Programming seems to work, audio also but the RF doesnt work. Please help. Mods DK doesnt have it they have the Owners operators users manual. I ...
Question about Icom Radio Communications
...tape cables from Conv Unit and Rf unit to main unit. Second find if the PLL ICs lock (MC145190) check voltage at pin 2 (LO) ~4,5Vdc in PLL Unit. Third find If the (PQ30RV31) voltage ADJ in main
Question about Radio Shack Radio Communications
...it's cover, and looked at them under a magnifying glass did I see a burnt wire in the 1st stage RF amp transformer coil. I found wire the same gauge & type (perhaps from another coil),
...or used one like it before. Start with a few basic settings below: Turn Squelch to minimum. Set RF Gain (if present) to maximum Set Mode to AM or FM Set volume to 1/3 up Connect to 50 ohm dummy ...
12 questions posted
Usually answered in minutes!