Connex 3300 240-Channels Base CB Radio "adjust frequency ssb radios" Questions

...POTS DO I NEED TO ADJUST? THANKS. You'll need to connect Frequency Counter to C252 & adjust: USB Frequency: 10.6975Mhz adjust L126 in receive mode LSB Frequency: 10.6925Mhz adjust L127 in receive ...

...adjust frequency on transmit??? Galaxy got a frequency counter and I can use my clarifier to adjust receive frequency, but what is the "VR" indise the radio to adjust the transmit frequency (its off ...

...VR-13 SSB ALC VR-14 AM HIGH POWER VR-15 AM MODULATION METER VR-16 AM MODULATION VR-17 SSB POWER VR-18 AM LOW POWER VC1-10.240 MHz Frequency adjustment Hope this helps you out, let me ...

...adjust the sideband side band is off frequency Instructions Connect one end of your coaxial cable to the output port on your SSB Transmitter. Connect the other end of the cable to the coaxial input ...

SSB dead key & TX frequency problems SSB mode has a high dead key. I had null-afied this in the past by direction of a Galaxy tech over the phone by adjusting VR6. It worked for a while, and then I ...

adjust frequency alignment adjust L20 (AM) L21 (USB) L22(LSB)

...frequency. If it needs adjustment, your voice will sound high/ low on transmit. Incoming signals will sound right after adjusting the osc. To use a freq counter on SSB, use a 1Khz oscillator in front ...

adjust VR13 & then to bring VR16 back down to an appropriate level. VR13 being the SSB ALC pot, seemed to have solved the problem until I went back and tried my radio again later that night. I&

...in the frequency generation circuitry (Mixer and fundimental stages). Best to bring it to a shop after you determine if the radio is really drifting (Verified by using it on SSB for an extended

...on transmit frequency how can i fix this problem best regards steve sc351 for upper ssb adjust L21 for 16.51250 mhz . adjust L22 for 16.50750 for lower ssb. you do have a frequency counter don't you