La Pavoni PC-16 Espresso Machine "steam brush open" Questions

...steam shaft. Take out the shaft by turning anti-clockwise the plastic knob until the whole shaft comes out. clean the inside of the attached shaft with a small wire brush. rinse under running water ...

...steam solenoid have a small part of scale stuck in it and blocking it from closing. You need to desasemble the machine and open the valve and brush it out so it clean and the inner part with sping ...

...steam solenoid valve is stuck open. This can be because of a small part from water usualy scale or lese is stuck in bettween the solenoid valve rod, or the whole valve rod is full of scale so it can ...

...steam valve or hose inside. You might try getting a flashlight and a cleaning brush - take out the brew mechanism and then clean around that little nozzle/valve that is in the recess just the left of ...

...steam wand brush and ensure that the tip is clear. Vent Valve: The vent valve on the top of the steam wand might be clogged. Try removing the valve and cleaning it to ensure proper steam flow. Boiler ...

open near the front, by the steam wand, with a hose attached coming from the heater, is the valve, attached to the knob on the side two more screws and the valve wrapped in a plastic housing comes out

open near the front, by the steam wand, with a hose attached coming from the heater, is the valve, attached to the knob on the side two more screws and the valve wrapped in a plastic housing comes out

...brush. It can be also be damage and most posible the solenoid coil burn out so you might need a new solenoid. So I beleive if you solve the coffee group blocked problem then you might have solve also ...

...steam comes out (for the whole time). I haven't used the machine in a number of months but this process has always worked before. I would do this any time I ran out of water and air got in to the ...