Question about Audio Players & Recorders
...won39;t revolve. It turns on, and when I turn it to 33 1/3, 45, or 78 I can hear something but the table won39;t turn. The noise in the video is the noise the record player is making. Most ...
won39;t turn on won't turn on Check the fuse in the plug. If that39;s ok then the fuse on the board might of gone. & if that39;s ok as well then the trancformer has gone bang.
it won39;t turn on i just bought some second hand str8 80s and they won't turn on!!! they have internal fuses...you must open the bottom panel and replace fuses.
Question about Stanton Audio Players & Recorders
...won39;t spin - the spindle is fine and it makes half hearted efforts to move but will only **** a few times and then stop. The self-lubricating bushing in the turn-table is dried out. This is a ...
won39;t turn on. Fuse is perfect, on/off mechanism seems to be operating okay (from the looks of it on the inside) .... I39;m at a loss. Anyone got any ideas? Have you got a volt/ohm meter? if you
...won39;t turn and when it on the light that point to the records blink on and off Hi Sammy, what make model is it please? Have you recently had any mods like LEDs fitted? ...
won39;t turn remove the record plate,, under it your going to see a belt laying there, its either come off or broke , to remove the plate, take of the rubber cover, they just lift off, in the center
...won39;t stop spining turntable won't stop spining If it is a turnatable that starts spining when the arm is moved to the record, then more than likely the start/stop switch inside the ...
Question about Aiwa Audio Players & Recorders
won39;t find 50/60hz adjustments, take it to repair shop.Good luck,Alex. I believe this is a belt driven turntable. With the power off, carefully remove the rubber mat. Turn the platter by had until
Question about Technics Audio Players & Recorders
...won39;t spin. I know I should hear the motor running, but it makes no sound and the plate won39;t turn... can you guys help me? Hi, remove the platter and check that the belt has not come off. ...
45 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: