clip back on? So I figured out how to remove the horseshoe clip from the center spindle, but does anyone know a trick for putting back on? Maybe I just don't have the muscle, but it's really giving me
...the drive pulley) and lift it off. The rest will become clear. To replace the clip,again, keep a cloth near the area and push it back into the groove with a wide bladed flat screwdriver.There you
Question about Pioneer Audio Players & Recorders
...glue it back with Bostick afterwards. At the spindle should be a horseshoe clip. It could be covered up, so you will have to remove the covering too. Remove the horseshow clip and it should come
...Put the platter back on and line up one of the holes in it over the brass knob. You should be able to put the belt around the knob no problem now. 5. Put the clip and cover back on, and you're
Question about Teac Audio Players & Recorders
...back on you must remove the pladder, but before you do check to see if there is a C clip holding it down, after removing the clip the pladder should come off, put the belt on the inner rim of the ...
...the centre area to get access to the clip. You can glue it back on if the platter itself is fine and not warped. If it is warped it would be cheaper to get a new deck than search for a new
Turn the platter by hand either clockwise or counter-CW and the belt will pop off of the post and land on the motor pulley. One drop of oil on the center spindle for lube and fasten the e-clip back on
...the motor spins, unplug power and place the drive belt on the underside of the platter. This is not easy, but it can be done with patience. Then put the C-clip back on and replace the mat.
45 questions posted
Usually answered in minutes!
325 Questions
254 Questions
185 Questions
116 Questions
103 Questions