...record player motor is not syncronous...I remember as a boy some of the cheap little record players I had would change pitch at different times during the day, based on the line voltage varying a ...
record player belt I have an Technics SL-23 record player and the drive belt has fallen off it's track. I cannot find a belt diagram anywhere to place the belt back where it belongs. Can you please ...
...record player, unhook the plug or four wires from the cartrige, then plug in the new cartrige the same as the old one was removed and screw it back in. Magnetic cartriges run from 20 bucks to several ...
...or just drop in tone. I can't figure out if it's the record player or the needle. The turntable is the problem, possible causes motor, flat belt is stretched or direct drive issue, needs
Question about Seth Thomas Audio Players & Recorders
...record player runs slightly too slow. How can I fix this?? I have looked online and found that replacing the motor and belt don't help. It is running just slightly too slow. I opened up the bottom of ...
record player i need a idler spring has myn looks stretched.my record player is running very slow the arm only moves a little bit then stops so iv got to turn the record by hand to help it so it looks
Question about JVC Audio Players & Recorders
...record player. stereo works, but record player will not work. how do i find the problem? I put the arm over the record and nothing. It does not appear to have power? or needs another part which i am ...
...record player do that and turn on the player without it on see if the grating noise is still there if it is u have a motor problem if it is gone find out from a stereo place what u can use to clean ...
record player fitted with a Garrard 2025TC record deck. The record deck suddenly made a light whining noise then stopped rotating altogether. The belt is still intact. Will the capstan need replacing.
Question about Audio Players & Recorders
...record player running... Now the phono motor does not run.. If the motor is directly connected to a mains supply then the chances are that when power was restored it burnt out or damaged the motor ...
33 questions posted
Usually answered in minutes!
138 Questions
47 Questions
49 Questions
36 Questions
15 Questions