Technics SL-1200MK2 Turntable "1210 start stop button" Questions

...1210 will not start up Help! i have power going to my 1210 mk2,but when you press the start/stop button the platter does not spin. When you press the button initially there is the slightest bit of ...

...1210 mk2 turntables everytime i press the stop button, they dont stop dead but start going in reverse. I have just replaced the pitches on them aswell. Any idea? I suspect the "brake" adjustment has ...

...1210 has stopped working, when i turn it on and press start it either turns half a rotation or if its left a min or 2 it starts to spin at abouts 150rpm and dosn't stop when the stop button is prest ...

1210 MK2 does not start Hi. I opened my mk2 to be able to fix the "groundcable" which was teared out. There i saw that the whole ground gum was full of some kind of dried fluid. Probably bear. I fixed

...which you slide up and down to change the pitch (the speed) of the vinyl. This can be increased even further by changing the 35rpm setting (button near the start/stop button) to 45rpm. Hope that ...

start/stop switch pcb, can anyone confirm this? You can indeed parallel it between start/stop button, or buy the unit for 50 euro :) or just read this page http://siber-sonic.com/broadcast/SL1200logic

...1210 mk2 turntables pop up light is constantly on even when down,the on/off red light and the pop up light both seem to flicker slightly when i push the start/stop button and also when i move the ...

...1210 pop up light? I recently installed two pop lights and two tone arms on a set of technics 1210s. Use technics replacement parts. Everything works fine except for one of the pop lights. when i ...

...1210 mk2 I recently changed the target lights to LEDs and also re-calibrated the pitches on a friends Technics 1210mk2's. The target lights work fine but now when i press the start/stop button both ...