Question about Mitsubishi WD Televison & Video
...DLP TV. the bulb is new but i am still getting error code 34... my question is if i change the ballast (part number 939P978020) will this fix my error code and allow my set to turn on? p.s. set turns ...
Question about Mitsubishi WD Televison & Video
...codes to your DLP HDTV. Error Code Probable Cause 12 No error detected 22 Recovery from momentary Reset 32 Lamp Cover open 33 Air Filter Cover open 34 Lamp abnormality 35 Chassis Fan failure 36 ...
ballast usually just fail. Any suggestions? Its far more likely the result of the power pwb capacitors that have failed. As the 34 code will appear if the capacitors fail on the Power PWB. You can get
Question about Mitsubishi WD Televison & Video
on error code 34 how do you check the ballast wd 52525 mitsubishi DLP There are two 1000uf 16V capacitors on the PWB that cause that problem code 34 lamp abnormality. If you need more info let me know
Question about Mitsubishi WD Televison & Video
...dlp-power-pwb-repair-kit/cName/repair-kits If the caps are not pregnated looking they are good. I had the same code and I changed the caps anyways and still did not work. I found out that it was the ...
Question about Mitsubishi WD Televison & Video
dlp tv. After playing for 20 mins. it would shut down and the lamp light would come on. I've searched google and youtube for answers. and thought it might be the fans. I removed all 3 fans and
...codes, and the corresponding problem: 12 = No error detected, check power supply. 32 = Lamp Cover is open. 33 = Air filter cover is open. 34 = Lamp abnormality 36 = Light Engine (DMD or Lamp Fan ...
...codes, and the corresponding problem: 12 = No error detected, check power supply. 32 = Lamp Cover is open. 33 = Air filter cover is open. 34 = Lamp abnormality 36 = Light Engine (DMD or Lamp Fan ...
Question about Mitsubishi WD Televison & Video
...DLP set and the lamp may have failed Second is it should have the self check which reads error codes---most of these sets that is the same: " After you turn on the set, and get the regular red blinky ...
...DLP Projection TV Timer light is blinking green and TV will not turn on. Prior to this the color was distorted, everything was green and purple. But had the code from last repair from technition. ...
71 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions