Panasonic DMR-ES25 DVD Recorder "rc1 remote" Questions

...DVD/VHS recorder...What do I do? Hold down 1 or number after RC (RC1, RC2, or RC3), and enter/ok button on the remote for 6 second while pointing it to the recorder. Chang the Remote control to

...remote I get an RC1 error. The manual says that is because the remote and the dvd unit are on different channels. The manual says go into setup and adjust the channel. The problem is that to get into ...

...RC1 when I push any button You have to use the remote for this unit or a remote for a similar dvd recorder, when you have it hold the enter/ok button and the number 1 or which ever number your stuck ...

...remote is transmitting RC1. Two choices for a fix: 1. Put the remote back into RC2 mode by simply holding both the ENTER and 2 button for at least 5 seconds. OR 2. Reconfigure the DMR to listen for ...

...read rc1 and the remote control is not responding i cannot get it to do anything turn on the dvd player press and hold the 'enter' key and the '1' key at the same time remote will start to work ...

...have tried unplugging, machine does not reset. help re-sync remote by pressing "enter"/"OK" while holding number "1" or "2" or "3" - the proper number should be displaying on unit as RC1, RC2, or ...

...RC1, 2, or 3 - the remote code needs to be reset. Other messages are "chk remote n" or "set n", n being the number 1, 2 or 3. These remote codes are set in case you have multiple products that ...

...RC1 ON THE DISPLAY AND WE CANT USE THE REMOTE FOR ANYTHING i WAS WONDERING IF THERE WAS A RESET BUTTON ON THE COMBO OR IF THERE IS A WAY TO RESET IT? Hold down the Enter key and 1 for several seconds ...

...remote control code from RC1 to RC2 now i get absolutely no response. i pressed enter and 2 and that didn't work. I thought that I may have to buy the factory remote control. Read the manual. Using ...

...control simultanously with OK button for approx 10 secondes ex: if rc1 appear on panel press number 1 and ok button on the remote for approx 10 sec. ( if RC2 press number 2, if RC3 press number