Question about Dremel Tools & Hardware - Others
Tried to replace motor brush on dremel. One brush is stuck. Tried to pry but the brush tip is still in the spring. Nothing to pry on. Any ideas? Tried tapping the tool, no help. Should I try some WD40
Question about Dremel Tools & Hardware - Others
tips if it gives any resistance to this your bearings have forign material in them (happens if your doing grinding allot) if a liberal dose of light oil (sewing machine) does not improve this friction
...base of the collet stuck inside the threaded bit. I discovered this when I bought new collets to replace the broken one. How to I remove the piece? The new collets will not seat low enough to
The motor runs, but the bit won't turn? On the dremel 395 there are 4 visible "star" screws holding the unit together. Get a star wrench/screwdriver and remove those. They kind of look like hex bolts,
Question about Bosch Tools & Hardware - Others
...out at the front of the drill. It might be a cracked collar. How do you remove the end of it to replace it? Pry the rubber tip off the bit holder with a small screw driver, then begin removing
...and the driver is $1.25. Placed order by phone: 1-800-437-3635. I ordered 2 of each in case future replacement is needed. Total bill came to $7.27 including Florida tax and shipping. Can't beat
197 questions posted
Usually answered in minutes!
35 Questions
27 Questions
32 Questions
23 Questions