Dremel Variable - Speed Multipro Rotary Tool 395 "not working" Questions

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

I plugged my dremel 395 to a 220 volts outlet in Hong Kong, not realizing that it works only on 110 volts. Now it does not work, even with a power converter attached. What needs replacing to make it ...

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

not working all-in-one rotary tool hand tool part will turn on but flexible shaft will not work anymore check and see if you have the right collet insert in the chuck if it is too big it wont lock the

Ad

Question about Dremel Tools & Hardware - Others

2 Answers

...working after about 1/2 hour running (not continuously, but total time in use). I went to the authorised service and they said faulty switch - $61 (AUS). Not worth it, the new tool is about $80. Next ...

Question about Dremel Tools & Hardware - Others

1 Answer

...it for replacement. If your power source is good and you have pressed the ON switch/button and nothing works, it is likely faulty. If you are not familiar with pulling them apart, it is best not ...

Question about Tools & Hardware - Others

1 Answer

hello i have a 11232EVS 1-1\2 ROTARY HAMMER DRILL on the highest speed (6)the chisel action does not work i have to select the lower speed (2) on the selector then increase gradually for it to work ...

How can I get the flexible shaft to work on my challenge xtreme mini rotary tool? The motor works, but the flexible shaft will not turn! oil it

Question about Tools & Hardware - Others

1 Answer

...working and blow the circuit breaker in the house. Either the circuit you plugged it into is not rated at high enough amperage for the Hoover (check the appliance for amperage demand), or there is a ...

Question about Dremel Tools & Hardware - Others

2 Answers

...response. I haven't received any expert advice yet, but when I do....! My dremel 200 series stopped workingNot very old, but it did get hot before it stopped.  Can a simple man fix it

...not working on my dremel but the dremel works fine without it. What can i try to get the flexi hose to work? I have unscrewed the flexi hose and re attached it. The flexi hose hasnt been attached for ...

Question about Dremel Tools & Hardware - Others

1 Answer

Cannot release tool from Dremel 300 I can't get the tool bit out of my Dremel 300. I depress the blue button and try to loosen the chuck with the little wrench tool that came with the Dremel but it ...

Not finding what you are looking for?
Dremel Variable - Speed Multipro Rotary Tool 395 Logo

197 questions posted

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

cluffermon

Level 1 Expert

4 Answers

Mike

Level 3 Expert

4369 Answers

Van Allen
Van Allen

Level 2 Expert

277 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...