...motor) but the shaft(ie the part the chuck hangs off) is not spinning so it's not useable.I can hang on to the shaft with the motor running flat out, there is no drive to the shaft.The shaft lock ...
Question about Dremel Tools & Hardware - Others
...motor shaft started feely spinning inside of the the entire mechanism that holds the bit. It is not a couling problem. The motor shaft seems to be broken inside of the couple. This is the second ...
motor? If so, do I have to pry it from the housing? as it does not easily lift out. Thank you for your help. Pat Solent Tools on 023 80578057 have had this spring manufactured. You can also order from
Question about Dremel Tools & Hardware - Others
shaft of the bit just falls out no matter how much I tighten the collet nut. I bought a new collet nut set, but that didn't help. None of the bits I have lock into the device. The motor runs fine, the
...motor shaft was not moving the working shaft that connects to your tools because it was connected with a thick heat shrink tube that had cracked from old age and no longer held each shaft tightly. A ...
197 questions posted
Usually answered in minutes!
35 Questions
27 Questions
32 Questions
23 Questions