Dremel Variable - Speed Multipro Rotary Tool 395 "fuse" Questions

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

Fuse cap and fuse spring loaded. Popped out... and now lost. Where can I get a replacement fuse for Dremel 300 rotary tool ? Thanks. try dremel web site for local dealers of spares

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

...ones. still not working. tool is still fairly new with only light to medium use. It could be the fuse between the brush and variable speed control switch. I have the same problem and found the

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

what are the two little blocks with the springs on them called that you put into opposite sides of the dremel? i thought they were fuses but when i search for dremel fuses or power tool fuses i dont ...

Question about Dremel Tools & Hardware - Others

1 Answer

where is the fuse for the dremel 300 series there is no fuse in this tool, you have another problem and I would go to Dremel.com and talk to their tech support and also download a breakdown for this ...

Question about Dremel Tools & Hardware - Others

1 Answer

...these: Try to see if your unit have a safety breaker and reset it,most of power tools have also a fuse in the plug itself. Also some have a thermostat fuse.,you can find it attached on the rewined ...

Question about Tools & Hardware - Others

1 Answer

...RPM disolay screen lights up. Any suggestions as to what might be going on? Thanks. Did you blow a fuse, or trip a circuit breaker? Often an overload like a stuck motor indicates there is a circuit ...

Question about Tools & Hardware - Others

1 Answer

locate fuse replacement for dremel solid state motor speed control try here they have some parts and exploded views

Question about Dremel Tools & Hardware - Others

1 Answer

it will not run. there was a "pop" and then it stopped. since then it wouldn't work i would have to say you blew the inline fuse or you brunt the motor up.

Question about Ingersoll Rand Tools & Hardware - Others

1 Answer

I HAVE AN INGERSOLL RAND SSR HP/40SE AIR COMPRESSOR W/INTELLISYS CONTROLLER 15-50 HP.IT HAS POWER,BUT DOES NOT HAVE ANY LED ON SCREEN.CHECKED CONTROL VOLTAGE-OK POWER LT ON,WHEN PUSH BUTTONS NOTHING ...

my rotary screw compressor is not running but on the controller shows that is on a running mode, what may be the cause? It tripped on power fault at first, reset it and now it shows the loading and ...

Not finding what you are looking for?
Dremel Variable - Speed Multipro Rotary Tool 395 Logo

197 questions posted

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

cluffermon

Level 1 Expert

4 Answers

Mike

Level 3 Expert

4369 Answers

Van Allen
Van Allen

Level 2 Expert

277 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...