Question about Dremel Tools & Hardware - Others
...the shaft on the attachment or is missing alltogether Sounds like you may have stripped the thread on either the collet but or the shaft. When you've tightened the collet nut does it go loose
Question about Dremel Tools & Hardware - Others
...collet. Slow and steady should get it loose. Another option is use some penetrating oil sprayed lightly onto the back of the collet to help loosen it from the shaft etc. Same thing happened to me... ...
Question about Dremel Tools & Hardware - Others
How do i take the bit off of a dremel multipro model395 type 5 unscrew the collet nut, and then if it's still stuck, tap the end of the bit on the table or something solid. It'll come loose then.
collet has bit into the soft shaft of the tool. Holding the rotation lock button in, grab the shank with some strong needle nose pliers and twist the shaft loose or pull it off completely with the nut
Question about Dremel Tools & Hardware - Others
...collet was not loose and the spindle turns free by hand. I pulled on the spindle to see if the shaft may have broke. There is no play to indicate the shaft is broken. Obvioulsy though something did ...
197 questions posted
Usually answered in minutes!
35 Questions
27 Questions
32 Questions
23 Questions