Dremel Variable - Speed Multipro Rotary Tool 395 "395 turn" Questions

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

395 motor just stopped. I was using it to drill some holes (under 2mm); as I did the last one, the motor note dropped as if I had turned down the speed, even though I didn't touch the switch. I turned

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

...395 works but the bit doesn't turn there is a coupling between the motor and the spindle that has probably cracked or stripped out. I suggest going to Dremel.com and getting an original replacement ...

Ad

Question about Dremel Tools & Hardware - Others

1 Answer

hi--my 395 type 2 with variable speed switch wont work unless one taps on the outer case, then it runs and stops--loose connection in variable switch? How to proceed? thnx mike if the motor runs fine ...

Question about Dremel Tools & Hardware - Others

3 Answers

should I be lubricating my dremel (395) tool? It sounds like my dremel tool (395) needs to be lubricated. It has a squealing sound when turned on which is differnet from its normal sound. What should ...

Question about Dremel Tools & Hardware - Others

1 Answer

Dremel 395 in the middle of drilling sea glass and the collet and bit stop turning while the motor is still running fine! GRRRRR Thanks for any suggestions! sounds like the rubber connector between ...

Question about Dremel Tools & Hardware - Others

3 Answers

395 i'm stumped Unplug it, then while pushing in the little silver button near the head use a wrench on the hex nut and turn counter clockwise about a 1/2 turn. Push the bit in, then pull it out (that

Question about Dremel Tools & Hardware - Others

1 Answer

...395 Rotary tool won't turn on or won't stay on but a second or two Electrically speaking there are a few items to check. 1) The easiest is to remove the two brush holders screws on each side by the ...

Question about Dremel Tools & Hardware - Others

1 Answer

Nylon Coupler crscks when installing Moto-Tool 395.. Nylon coupler cracks open whrn I replce it. Two ?'s : How do I order replacement nylon couplers and why do they crack open when I install? I'll ...

Question about Dremel Tools & Hardware - Others

1 Answer

Broken Dremmel tool spindle stop turning but motor runs My dremmel tool is an older model 395 type 3 about 20 years old but rarely used. I was using it to drill a pin hole in a gourd and all of a ...

Question about Dremel Tools & Hardware - Others

1 Answer

...395 Type 2? My tool does not have the access on the sides that you put a screwdriver and turn the housing to access the brushes. I can not find any information on how to remove the access pannels. I ...

Not finding what you are looking for?
Dremel Variable - Speed Multipro Rotary Tool 395 Logo

197 questions posted

Ask a Question

Usually answered in minutes!

Top Dremel Tools & Hardware - Others Experts

cluffermon

Level 1 Expert

4 Answers

Mike

Level 3 Expert

4369 Answers

Van Allen
Van Allen

Level 2 Expert

277 Answers

Are you a Dremel Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...