I have a HILTI Battery Drill TCD 12 and the trigger is broke any ideas where i could get a new one I have two Hilti TCD-12 drill kits for sale. SLASH1969 at MSN dot COM
How do I take the chuck assy. off a Makita 12 volt drill driver? open chuck up all the way, and look down inside for a screw at bottom that needs to be removed, then twist it off.
12 v Makita cordless? How much? You need to contact Makita directly. But from experience, it's usually cheaper to purchase new drill than replace parts. If you are going to buy a Makita Cordless Drill
...on my Madita cordless driver drill 12 volt whare can I get it fixed?? I dont know where you live but there should be a local industrial distributor aroung and they usuall always have a repair ...
Question about Bosch Drills
...12 cordless drill to recharge the battery? You shouldn't have to remove any parts, except the battery itself, to charge the PSR12. I did find a breakdown of your drill that shows a 'Battery Retaining ...
12 volt battery will burn up the drill, I might as well throw away the old drill and get a new one. Thanks, Earl This close to father's day you should be able to buy a new drill for about the same
...12 volt makita drill remove keyless chuck There should be a Screw in side the end of the chuck were u put the drill bit in u will have to undo it back wards its got a left hand thread go to the tip ...
12 volt dewalt drill yesterday at the Dewalt warranty store in Denver. Today I took the housing off the drill and it does not have the same type of brushes in it as the counterman sold me. (I took the
...my charger is faulty TAKE TEST METER ON DC VOLTAGE AND PLACE ON THE TERMINAL IN CHARGER SHOULD READ 12 VOLTS ON 2 OF THE TERMINALS IF YOU DON'T HAVE A METER YOU CAN USE A TAIL LAMP SOCKET AND BULB OR ...
My 12 volt Makita drill works as long as the trigger is halfway depressed. It totally quits when the trigger is fully depressed. bad battery... Ck
210 questions posted
Usually answered in minutes!
91 Questions
21 Questions
17 Questions
16 Questions