...whisper drive garage door opener. It was working fine until the emergency release was pulled while the door was in the open position. Now the door will open without a problem but the door seperates ...
Whisper Belt Drive The belt drive on my garage door opener keeps slipping off the pulley. The garage door will not open with the opener. I have put the belt back on the pulley and attempted to tighten
Question about Chamberlain Car Audio & Video
...Whisper garage door system that only closes 3/4... then pops back open. Nothing blocking sensors, though one sensor has either a green or yellow light at various times. Does this mean sensor has gone ...
...Whisper Drive modelHD600. I've check and checked and have no idea why the main rail would bow when the door closes all the way, its subtle but still it bows. If I adjust the down travel so it doesn't ...
Whisper Drive guess what I also have the same problem with it as the cold has set it. Disconnect the door from the drive and see if it works without a load. Check the sensor performance. This can rule
Question about Chamberlain Car Audio & Video
...the logic board. There is an inherent design flaw in the sockets with some of the openers. The Whisper Drives have this problem. The bulb does not make a good contact with the bottom tab. ...
Question about Chamberlain Car Audio & Video
Chamberlain Whisper garage door closes 3/4 then pops open sensors not blocked, but one has green or yellow light at alternating times. does sensor need to be replaced? check the wiring if its ok you ...
I hae a Chamberlain Whisper Garage Door Closer. When I press the button to close the garage door the light flashes and I have to go to the wall control and shut it that way. Why is it doing this? Also
307 questions posted
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
240 Questions
257 Questions