Black & Decker BDL500S "push rod" Questions

push rod. The intake valve keeps seizing after it's shut off. We free the valve, straighten the push rod and it will run till we shut off. Then same thing. Valve seizes and bends the push rod. We have

...push rod i have a bent push rod in a brigg 14.5 hp motor what might be causing this This is a vary commom problem with an Intek engine, I have a similar 21HP engine with similar issue. The valve is ...

push rod. nothing else seems busted. still need to pull heads to check valves and cylinders, need manual for Intek V-Twin cylinder OHV engine. You can find a manual, free of charge at www. briggs &

...push rod's bad starter,now maybe broken rod,s is their anything that brigg,s would do about this Bent push rods are a function of the valve guide coming loose in the head. The valve binds and you end ...

i just put 2 push rods in and it wont start. how tight does the valv have to be be on the push rod Need model number

...pulled a valve cover and found a bent push rod and the other one missing. Do I need to pull the crankcase to find the missing push rod or can I just replace the push rods and start it up? Gotta find ...

have a 22.0 HP b&sengine that is bending push rods. Can see vale guids have came out of head and stop vale from opening push rods bend. Will B&S replace the heads? you mite have a broken crank

...rockers dont move any info would be nice you my have a broken rod pull spark plugs out and see if pistons are moving,if so check for bent push rods,if push rods aren't bent then you may have bad ...

...now all it will do is turn over what do i do to fix it This motor has a known problem for bending push rods. RECOMENDATIN: Check for bent push rods. Change oil every 30 hours of operation or less. ...

14.5 HP has bent valve push rod and neither valve works has bent valve push rod and neither valve works I am not familiar with this small engine but probably is broken camshaft or timing chain or gear