Chuck won't tighten Can't get the chuck to tighten The chuck is held onto the drive shaft via screw located inside the chuck. The screw has reverse threads and sometimes the screw gets loose ...
i have a craftsman electric drill model no. 315.10419, i would like to know how to loosen/tighten the chuck for the bits. it is not the regular notched tightener but has a pull down shaft similar to ...
how to tighten drill bit on makita 6343d i can not find key hole to tighten bit your must have a keyless chuck. hold the black center part of the chuck and run the drill forward or backward to open or
Question about Drills
Just bought a new Bosch 650 drill and the teeth inside the keyless chuck dont seem to tighten regardless what I do. They are wide open. Any ideas? Take it back if you just bought it. You should be ...
DIFFERENT CHUCK? MY OCTAGON SHAPE ENDED BITS DONT SLIP. OR AM I DOING SOMETHINTG WRONG? You have to tighten the chuck more. Tighten in all three holes to get even pressure on the bit
held onto the motor shaft by a screw located inside the chuck. This screw has loosened and requires tightening. This screw has reverse threads and in order to tighten it, you need to turn the screw in
Question about Craftsman Drills
...insulated model # 315.101420 The chuck is open completely and I am unable to release it so I can tighten a bit. I can't turn the chuck key to tighten the chuck Give it a shot of WD40 It may be ...
Question about Craftsman Drills
...insulated model # 315.101420 The chuck is open completely and I am unable to release it so I can tighten a bit. I can't turn the chuck key to tighten the chuck. what can i do Buy a new
When I put in reverse chuck backs off Tighten the chuck bolt, it's in the center of the chuck, just open it all the way as if you were putting a large bit in it and tighten the bolt, usually with a ...
Question about Bosch Drills
...just does not work. Am I doung something wrong? I put the red keyless chuck into the chuck and tighten it down and when I try to put in a drill bit, the chuck does not tighten no matter how I ...
122 questions posted
Usually answered in minutes!
104 Questions
75 Questions
18 Questions
14 Questions