Samsung 4 Channel Dvr "system initialization" Questions

The samsung monitor ssc21web shows system initialize... the three periods blink I want to initialize the system or get back into the camera view . The shr 1040 drive is on and 3 of 4 lights on the dvr

My system initializes, when it gets to the hard drive it initializes then goes to a blank screen. All my cameras and cables are good, I've checked this. REMOVE THE HDD THE SYSTEM GONNA WORK GOOD ITS A

Samsung SHR-1040 DVR When I plug the unit in, It goes to the screen "Initializing System", and does nothing else. try resetting the system and reprogramming if that does not work you may nee to find a

...and get picture; so it must be the DVR that's not working correctly. For what we gave for this system (499.99 at Sams' Club) it should be better quality. I don't think we'll look to Samsung for ...

reset password samsung SDR-5102 Required reset password Samsung SDR-5101 DVR. Thanks. By default, initial ID and password are set to "admin", and "4321

voltage sensing and not tach sending. I'd get them to hook it up to a tach source, as your charging system might be too weak in the cold to give the system a voltage it is looking for

I forgot my password and I cannot do anything. What is the solution? SHR-1040 DVR security system. Factory Reset Hidden Key :Mode Key + CH 2 The Password and all setting value will return to the ...

...and hour from the current setting) than the current time and see if that come up if so then set the system to the current time and date and check again, if that solves your problem great if not reset ...

please help me make it work batteries checked but not sounding when cars enter.i inherited with new home`does the sensor in driveway need to point in a specific direction? Simple answer is YES, ...

samsung shr 1040 I purchased it used and after the system initializes all I get is a screen that says SYSTEM STANDBY Thanks Michael [email protected] try resetting the system and reprogramming. if ...