panel to close the door. The door is made to have safety sensors attached. These sensors shouldBe located near the floor. One on each side of the door. They use an infrared light which you canNot see,
...press the CHIME button on the front panel. If it is lighted solid red then your chime is on and it will talk to you. If chime is off then it wont talk to you at all when a zone is tripped. Good
front panel when powered up. Cooling fan in rear works. Is there a reset button somewhere?? There is a small hole next to the power input socket. You are supposed to power down, hold the button in and
...front panel come on and stay on. It hangs at the boot up screen just after it finds the hard drives. I cannot access it through the Wave reader software either. Sorry this thing it garbage now.The ...
...front of the panel to blink. Then hold the one to the right. This should make the yellow light blink slowly which means it is in programming mode. now just enter 1# (new code)* (new code)* * to exit ...
...panel then pull the system's power transformer which should be plugged into an electrical outlet nearby. You will know that all power is removed by looking at the keypad - all lights on the display ...
...front panel remain lit. It seems to fail the CMOS start up test. Tried using the RESET button inside the unit on the mainboard, it blinks the lights but they remain on. Tried the white switch on the ...
40 questions posted
Usually answered in minutes!
79 Questions
31 Questions
24 Questions
21 Questions
9 Questions